1-4 DAYS DELIVERY
XTOOL - KS-2 - Mitsubishi Smart Key Emulator - AutoProPad
100% ORIGINAL AND QUALITY
24 MONTHS GUARANTEE
- Description
- Compatible With
Product SKU: LLB-XTL-KS-1
LLB-XTL-KS-1
Manufacturer: XTOOL
The KS-1 is a smart key emulator for 40-bit Toyota, Lexus & Scion systems. It can read and store the vehicle’s immobilizer data through any AutoProPad G2 or AutoProPad G2 Turbo programming device, then write it to the KS-1 and emulate a programmed master key.
The emulated “key” will allow you to switch the ignition on, so you can start the vehicle and perform active diagnostics. It will also serve to bypass the 16-minute immobilizer reset when programming an additional car key.
- Works for all AAB, AEM, and ACX Toyota/Lexus/Scion smart keys
- Requires internet connection
- Requires KC100 or KC501
NO. | Vehicle | Year | Key Type | Support or Not | Remarks |
1 | RAV4 | 2015 | 88 | Yes | |
2 | Alphard | 2013 | 94 | Yes | |
3 | Alphard | 2015 | A9 | Yes | |
4 | Previa | 2008 | 94 | Yes | |
5 | Crown | 2010 | 98 | Yes | |
6 | Crown | 2015 | A8 | Yes | |
7 | Crown | 2016 | A8 | No | After 2016,Toyota Crown is not supported |
8 | Prado | 2011 | 98 | Yes | |
9 | Previa | 2013 | 94 | Yes | |
10 | Reiz | 2011 | 98 | Yes | |
11 | Innova | 39 | Yes | The car is being tested for the Indian Tango |
Specifications:
Parameter | Index |
Battery | CR2025 3V 165mAh |
Standby current | Standby current≤2μA |
Reading and writing frequency | 125kHz |
Status Indicator Lamp | 1pc (mode: turn on and light up for 2s and then extinguish; Flicker, flash, 0.5s/ time when writing or reading) |
Update | The simulation card firmware can be updated with KC100 |
Working temperature | -20℃~60℃ |
Storage temperature | -20℃~70℃ |
Structure size | 66mm*40mm*12mm |
More information below:
Suitable for the following vehicle:
2008 - 2021 Mitsubishi Lancer
2012 - 2014 Mitsubishi Mirage
2008 - 2021 Mitsubishi Outlander
SKU: LLB-XTL-KS-1
Location: PAC 72