1-4 DAYS DELIVERY
100% ORIGINAL AND QUALITY
24 MONTHS GUARANTEE
- Compatible With
Product SKU: OBS-FCA-CABLE-2
OBDSTAR FCA 12+8 Universal Adapter Functions:
Key programming and odometer adjustment via OBDII
Used with other diagnostic devices to read and clear fault codes
How to Use OBDSTAR FCA 12+8 Universal Adapter:
To locate and unplug the 12PIN and 8PIN connectors of the SGW module,
To connect the OBDSTAR FCA 12+8 universal adapter directly to the 12PIN and 8PIN connector on the car (two connectors connected to the SGW)
At this point, normal communication with the car can be achieved.
FCA (FIAT/CHRYSLER/ALFA ROMEO) can be used for the following cars:
OBD Cluster Calibration, OBD Key Programming, Oil/Service Reset; Also can be used with other diagnostic equpment for read code and clear code etc;
All 2018- FCA (FIAT/CHRYSLER/ALFA ROMEO) vehicles are equipped with SGW security gateway module, which can prevent access to the vehicle from the OBD2 port through non-original diagnostics. The purpose of this module is to prevent attacks on the vehicle network via the CAN bus.
FCA 12+8 CABLE
All FCA vehicles after 2018 are equipped with SGW security gateway module to prevent attacks on the vehicle network through the CAN bus. Directly plug in the OBD II-16 connector cannot communicate with them. For this problem, you can connect to the 12PIN and 8PIN connections on the car through the FCA 12 + 8 cable to help normal communication with the car.
The following models must use this connector
2018-JEEP GRAND CHEROKEE
2018-MASERATI, include GHIBLI, LEVANTE,PRESIDENT
Location: Z 5